How To Fix Bootrec/Fixboot Access Is Denied Error For Windows 7, 8, And 10?

How To Fix Bootrec/Fixboot Access Is Denied Error For Windows 7, 8, And 10?

The Bootrec/Fixboot Access Is Denied error occurs when you try to perform some recovery steps on the computer, while there are already some issues. But, don’t worry. The ITProSPT.com – who share useful information about IT has provided some solutions, which are:

Do the Automatic Repair after Volume Naming

If you have tried naming the volume, yet you are still facing with Access denied error when running bootrec, you can now try the Automatic Repair utility to fix the issue,

1. Add the installation drive you have used recently to boot your PC. Now, the next steps are different for each operating system, so be careful which one is suitable for your computer.

• WINDOWS XP, VISTA, 7: Windows Setup will require you to enter the details like language, time and date settings. Enter them, and pick the Repair your PC needs from the lower part of the window. Keep the underlying radio button checked when you are using the option ‘Use Recovery Tools’ or ‘Restore Computer’ before pressing ‘Next’. Now, pick the Startup Repair option.
• WINDOWS 8, 8.1, 10: The choose the keyword layout window will appear, where you can select the desired option. From there, navigate to Troubleshoot > Advanced Options > Automatic Repair/Startup Repair.

2. After accessing the Automatic Startup Repair, the steps will again be different for each of the operating systems. For Windows 10 keys, the Preparing Automatic Repair window will be displayed. It is then followed by the window asking for the Account and the password.
3. After the completion of this process, another window will show up. Stay patient and follow the instructions displayed on the screen. Now, verify whether Automatic Repair has figured out the solution for bootrec/fixboot access denied in Windows 7 and other versions.

Disable Fast Boot in BIOS

The Fastboot or Quick Boot option will help you to accelerate the booting process. Tests are run at each time of the booting for your PC. However, you do not need these tests each time you boot, you can turn them off to save time.

1. Turn on the computer again, and attempt entering BIOS settings as the system is going to begin. The BIOS key can be found on the boot screen. The standard BIOS keys are F1, F2, and Del.
2. The setting which you need to turn off will be under the Boot tab. Or, it could also be present at the general screen or under the BIOS Features tab. The setting is named Fast Boot, or Quick Boot. When you find the right settings, set it to Disabled.
3. Additionally, for the process to work, you’ll need to disable the Secure Boot as well. Utilize the right arrow key in the BIOS settings window to pick the Security menu. Then, utilize the down arrow key to choose the Secure Boot Configuration. After that, press Enter.
4. Next, a warning will appear. Ignore it, and press F10 to proceed with Secure Boot Configuration. Use the down key to choose Secure Boot, right arrow key to disable the setting.
5. Another step you should do is to change the boot mode from UEFI to Legacy. It’s generally situated under the Boot tab.
6. At the point when you find the Boot Mode option, change it to Legacy.
7. Press Exit and save changes. This will continue with the PC’s boot.